 |
||||
|---|---|---|---|---|
|
An aerial photograph of Queen Bee Farms showing the wetland treatment area and the two automatic sampling locations at the inflow and outflow points. At each of these points there are two sampling stations, an upstream and a downstream, that measure the difference in the water column height between the two. If the value of this height is greater than 0.01 then a sample is taken from the downstream location and preserved with acid and stored for collection. In total Queen Bee consists of four sample stations: inflow upstream, inflow downstream, outflow upstream and outflow downstream. |
||||
|
Telemetry Data |  |
The antennae used to remotely send data to and receive input from our office fifty miles away. With our trusty office van in the background. | ||
Water Samples
|
 |
The Queen Bee downstream culvert location where the Queen Bee project started and our acid dosing system was first installed. This automatic sampler is located at the outflow point. Of the two samplers at this location it is downstream relative to the other. | ||
|
Reports
|
 |
The Queen Bee downstream ditch location where our work with an automatic acid dosing system was continued successfully. This automatic sampler is located at the inflow point. Of the two samplers at this location it is downstream relative to the other. | ||
